On the Event Schedule screen, highlight the schedule you want to delete and click on the Delete button to edit. The Home and Away schedules cannot be deleted.

Suspending/Activating An Event Schedule

On the Event Schedule screen, highlight the schedule you want to activate or suspend and click the Activate/Suspend button. This button's label will change

depending on the current state of the schedule shown in the Status column.

Executing An Event Schedule

On the Event Schedule screen, highlight the schedule you want to run and click on the Execute button to run. The actions will be executed immediately,

regardless of the

event

conditions. You can also immediately run macros from the

screen navigation

buttons and the

system controls

menu.

Event Condition

The Event Condition is what will trigger the list of actions to be executed. An event condition can either be a device event or a specific time of the day. An

example of a device event condition would be "When the front door is opened, chirp the alarm and take a video clip from the foyer wireless camera." An example

of a time event condition would be "At 9:00 am, disarm the system."

Device Event Condition

Each device type has an associated list of possible events. When the event occurs, it sends a message to the controller and the controller scans the list of Event

Schedules and decides if it needs to perform any actions. In order for the Event Schedule to be executed, the device must be in an armed state. You can also

fine-tune when the controller executes the schedule by configuring additional time based parameters for the device event.

The following example will only be executed "When motion is detected from the Front door camera on weekdays from 9:00 am to 5:00 pm...". If motion is detected

outside the Day and Time Range (and the camera is armed) the associated actions will not be executed, but the event will still be added to the Event Archives.

Motorola homesight™ USER GUIDE

Table of Contents