Motorola HMEZ2000 User Manual page 143

Device
Siren, Repeater, Wireless Keypad, Camera without motion
sensor
Power Controller, Lamp Dimmer
The interpretation of the status descriptions are described below:
Status Description
no communication with device
motion sensor armed
motion sensor not armed
ready
on
off
no data available
no contact with device
open, armed
open, disarmed
closed, armed
closed, disarmed
dry, armed
136
Status Description
• ready
• no communication with device
• on
• off
Meaning
Wireless communication with the device has failed.
An event will be generated if motion is detected.
No event will be generated if motion occurs.
The device is operating properly
The lamp dimmer or power controller is in the 'on' state
The lamp dimmer or power controller is in the 'off' state
More than the expected time interval has elapsed since the device sent its status.
The sensor is currently detecting an open state. An event will be generated if a state change is detected.
The sensor is currently detecting an open state. No event will be generated if a state change occurs.
The sensor is currently detecting a closed state. An event will be generated if a state change is detected.
The sensor is currently detecting a closed state. No event will be generated if a state change occurs.
The sensor is currently detecting a dry state. An event will be generated if a state change is detected.
Motorola homesight™ USER GUIDE