Table of Contents
Advertisement
SAFETY CAB GENERAL ASSEMBLY - PLATFORM TASKS
10. Seek assistance to steady the operator platform and remove
the gas strut. Refer to Fig 31.
11. Seek assistance and carefully lower the operator platform.
Fold the seat and arms forwards to provide adequate
clearance for the cab assembly. Refer to Fig 32.
12. Remove both of the front pivot support plates at the front of
the platform. Refer to Fig 33.
13. Assemble the pivot support plates to the front of the cab
assembly using the pivot retaining pins. Refer to Fig 33
(A).
14. Remove the bolts which will retain the cab assembly to the
transport frame. Refer to Fig 33 (B).
SAFETY CAB GENERAL ASSEMBLY - ASSEMBLY Continued
15. Remove both cab doors and the roof, before fitting.
16. Using suitable lifting equipment (minimum safe lifting
capacity of 350Kg) raise the cab clear of its transport frame.
Refer to Fig 34.
Fig 34
Issued: 01.04.11
Approved:
Fig 31
Fig 32
Fig 33
B
B
Mod. No.
5060358
A
Sheet 38 of 64
Part No. 111-4431 (A)
Advertisement
Table of Contents
