Table of Contents
Advertisement
Parameters
EN-07 Domain Name
Range:
0 N/A
[0 - 2147483647 N/A] Domain name of the attached
EN-08 Host Name
Range:
0 N/A
[0 - 0 N/A]
NOTE
Please note that the display of the drive will only show the
first 19 characters, but the remaining characters are stored in
the drive.
EN-09 Physical Address
Range:
0 N/A
[0 - 0 N/A] Read only Displays the Physical (MAC)
*
8
8
EN-1# Ethernet Link parameters
Option:
[0]
Port 1
[1]
Port 2
EN-10 Link Status
Option:
[0]
No Link
*
[1]
Link
EN-11 Link Duration
Range:
0 N/A
[0 - 0 N/A] Read only. Displays the duration of the
*
EN-12 Auto Negotiation
Option:
Function:
Configures Auto Negotiation of Ethernet link
parameters, for each port: ON or OFF.
[0]
Off Link Speed and Link Duplex can be configured in
EN-13 Link Speed and EN-14 Link Duplex.
[1]
On
*
40
Function:
network. Can be automatically
assigned when using DHCP.
Function:
Logical (given) name of option.
Function:
address of the option.
Function:
Applies for whole parameter group.
Function:
Read only. Displays the link status of the Ethernet
ports.
Function:
present link on each port in dd:hh:mm:ss.
PROFINET Operating Instruction
NOTE
It is recommended to set EN-12 Auto Negotiation to OFF [0]
for the PROFINET option and for the connected port. This will
ensure that the connected ports will be set to an optimized
Link Speed with Link Duplex setting. If only one of the ports
in a link is set to Auto Negotiation ON, it can course the ports
to switch to half duplex, resulting in poor network
performance. Most switches today have Auto negotiation
set, but this can lead to a longer time to establish a
connection.
EN-13 Link Speed
Option:
[0]
None
*
[1]
10 Mbps
[2]
100 Mbps
*
EN-14 Link Duplex
Option:
[0]
Half Duplex
[1]
Full Duplex
*
EN-80 FTP Server
Option:
[0]
*
[1]
EN-81 HTTP Server
Option:
[0]
Disabled
*
[1]
Enabled
EN-82 SMTP Service
Option:
[0]
Disabled Disables the SMTP (e-mail) service on the option.
*
[1]
Enabled
EN-89 Transparent Socket Channel Port
Range:
4000 N/A
Function:
Forces the link speed for each port in 10 or 100
Mbps. If EN-12 Auto Negotiation is set to: ON, this
parameter is read only and displays the actual link
speed. "None" is displayed if no link is present.
Function:
Forces the duplex for each port to Full or Half
duplex. If EN-12 Auto Negotiation is set to: ON,
this parameter is read only.
Function:
Disabled
Disables the built-in FTP server.
Enabled
Enables the built-in FTP server.
Function:
Disables the built-in HTTP (web) server.
Enables the built-in HTTP (web) server.
Function:
Enables the SMTP (e-mail) service on the option.
Function:
[0 - 65535
Configures the TCP port number for the
*
N/A]
transparent socket channel. This enables
Drive messages to be sent transparently
on Ethernet via TCP. Default value is
4000, 0 means disabled. This port is used
by the DCT-10.
Advertisement
Table of Contents
