GE AF-650 GP PROFINET Operating Instructions Manual page 18

How to Configure the System PROFINET Operating Instruction
The GSD file is now imported and will be accessible via the
following path in the Hardware catalogue:
5 5
Open a Project, set up the Hardware and add a PROFINET Master system. Select GE FC PN then drag and drop it onto the
PROFINET IO system.
A window for the Device name of the now appears. Type the name into the field. Note that the name must match the name in
EN-08 Host Name. If the checkmark Assign IP address via the IO controller is set, the controller will download the IP address to the
IO device that has the corresponding device name. The IP address is stored in the non volatile memory of the .
The next step is to set up the peripheral input and output data. Data set up in the peripheral area is transmitted cyclically via
telegrams/PPO types. In the example below, a PPO type 6 is dragged and dropped to slot 1.
See the PPO types section in How to Control the Frequency Converter for more information.
17