Installing/mounting
4.4 Transmitter installation
4.4.6
Turning the local display
The local display can be turned in steps of 30° in order to optimize the viewing angle.
1. Remove lid lock screw of display cover.
2. Remove display cover.
3. Carefully pull out local display.
4. Turn display into desired position.
5. Carefully push display back into housing.
6. Remove o-ring from lid.
7. Reinstate display cover until mechanical stop. Wind back lid by one turn.
8. Mount o-ring by pulling it over the display cover and turn display cover until you feel
9. Reinstate and tighten lid lock screw.
48
friction from the o-ring on both sides. Wind display cover by one quarter of a turn to seal
on the o-ring.
SITRANS FC430 with HART
Operating Instructions, 03/2012, A5E03361511-01