Turning The Local Display - Siemens SITRANS FUS060 Operating Instructions Manual
Ultrasonic flowmeters with profibus pa
Hide thumbs
Also See for SITRANS FUS060:
- Operating instructions manual (52 pages) ,
- Quick start manual (17 pages) ,
- Operating instructions manual (122 pages)
Table of Contents
Advertisement
Installing/Mounting
4.1 Transmitter installation
4.1.1
Turning the local display
The local display can be turned in 90° steps to enable better reading in case of vertical installation
or overhead assembly.
1. Switch off the power supply.
2. Release the catch on the lid of the electronics compartment with a 3 mm Allen key.
3. Unscrew the cover.
4. Carefully release the fastening hooks of the local display using a screwdriver or similar tool
5. Pull out the unit, turn it to the desired position and push it back in.
6. Screw the lid back on and mount the lid catch.
Figure 4-2
30
①
Fastening hooks
Unlocking the fastening hooks on the local display
SITRANS FUS060 with PROFIBUS PA
Operating Instructions, 09/2021, A5E02225054-AD
Advertisement
Table of Contents
