Nokia 7368 Product Manual page 94

Configure a G-2426G-A indoor ONT
Network configuration
Configuring WAN
Figure 7-14 WAN page
2
Configure the following parameters:
Table 7-11 WAN parameters
Field
WAN Connection List
Connection Type
IP mode
Enable/Disable
NAT
94
Description
Select a WAN connection from the list to set the connection parameters.
Select a connection type: IPoE or PPPoE.
Select an IP mode from the list: IPv4 or IPv6.
Select this checkbox to enable the WAN connection.
Select this checkbox to enable NAT.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
7368 ISAM ONT
September 2020
Issue 1