Nokia 7368 Product Manual page 57

Install a G-2426G-A indoor ONT
Procedure
1
Place the indoor ONT unit on a flat surface, such as a desk or shelf.
Note: The G-2426G-A cannot be stacked with another ONT or with other equipment. The
ONT mounting requirements are:
•
•
•
2
Review the connection locations, as shown in
(p. 56).
Figure 5-1 G-2426G-A ONT connections
3
Connect the Ethernet cables to the RJ-45 ports.
4
Route the POTS cable directly to the RJ-11 port as per local practices.
September 2020
Issue 1
allow a minimum 100 mm clearance above the top cover
allow a minimum 50 mm clearance from the side vents
do not place any heat source directly above the top cover or below the bottom cover
USB TEL1 TEL2
USB POTS port
port (RJ-11)
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
Figure 5-1, "G-2426G-A ONT connections"
WPS LED
LAN1 LAN2 LAN3 LAN4 POWER WLAN RESET ON/OFF
Ethernet ports (4) Power Wi-Fi
(RJ-45)
security/
on/off buttons
7368 ISAM ONT
On/off
button
Reset
button
36176
57