Nokia 7368 Product Manual page 132

Configure a G-2426G-A indoor ONT
Security configuration
Configuring DMZ and ALG
Figure 7-34 DMZ and ALG page
2
Configure the following parameters:
Table 7-28 ALG parameters
Field
ALG Config
DMZ Config
WAN Connection List
Enable DMZ
DMZ IP Address
3
Click Save ALG.
132
Description
Select the checkboxes to enable the protocols to be supported by the ALG: FTP, TFTP, SIP, H323,
RTSP, L2TP, IPSEC, PPTP.
Select a WAN connection from the list.
Select this checkbox to enable DMZ on the chosen WAN connection.
Select Custom Settings and enter the DMZ IP address or select the IP address of a connected
device from the list.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
7368 ISAM ONT
September 2020
Issue 1