Configure a G-2426G-A indoor ONT
Configuring the Application
Configuring port triggering
Table 7-32 Port Forwarding parameters (continued)
Field
Enable Mapping
WAN Connection List
3
Click Add.
E
ND OF STEPS
7.38
Configuring port triggering
1
Click Application Port Triggering from the left pane in the GPON Home Gateway page. The
Port Triggering page displays.
138
Description
Select this checkbox to enable mapping.
Select a WAN connection from the list.
Note: Only active devices are shown on this list.
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
7368 ISAM ONT
September 2020
Issue 1