Table of Contents
Advertisement
The help text shown at the bottom displays the possible actions that can be taken in that screen:
Arrows are used from moving from one alarm to another
By pressing F1, we move to the MEASURES screen
By pressing F2, we acknowledge the selected alarm (when we are placed on an alarm, its colour is shown in
negative).
By pressing F3, we automatically acknowledge all the alarms appearing on the alarms screen.
4.7 MEASURES SCREEN
If we move from the alarms screen to the measures screen, the display will look as below:
The displayed values are values on the primary side.
4.8 INPUTS/OUTPUTS SCREEN
From the measures screen, we can move to the inputs/outputs screen by pressing the F1 key. The displayed screen
will look as follows:
Those inputs/outputs active at a given moment, will be displayed with a dark shadow.
GEK-106305A
4. PROGRAMMING THE UNIT
DTR Digital Tap Changer Controller
47
Advertisement
Table of Contents
