Safety; Safety And Instructional Decals; Setup - Toro Sand Pro 3040 Manual

Safety

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Warning—do not touch the hot surface.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
106-5517
Description
Drag-mat-carrier assembly
Attachment-adapter assembly
Shoulder bolt
Washer (0.531 x 1.063 inch)
Washer (0.469 x 0.922 inch)
Locknut (7/16 inch)
Bolt (3/8 x 2-1/2 inches)
Washer (3/8 x 7/8 inch)
Spacer
Locknut (3/8 inch)
Shackle
Clevis pin (3/8 x 1-1/2 inches)
Cotter pin
Steel mat (not included in this kit, order
separately)
Coconut-fiber mat (not included in this
kit, order separately)
Mat retainer
Bolt (3/8 x 1 inch)
Flange nut (3/8 inch)
No parts required
No parts required
Qty.
1
1
1
1
3
1
2 Assemble the drag mat carrier.
4
2
2
2
2
2
1
1
Install a mat.
11
11
11
Mount the drag mat carrier to the traction
–
unit.
–
Adjust the link assembly.
3
Use