Toro Sand Pro 3040 Manual page 10

Maintenance
Inspecting and Cleaning the
Drag-Mat Carrier and Traction
Unit
When you finish operating the machine, clean the it
thoroughly. Wash off the machine after each use. If you clean
the machine frequently (before the material has a chance to
cake), you can clean it with a stream of water from a hose
with the nozzle removed. A high-pressure stream could drive
the material into wear areas where it could act as a grinding
compound.
Greasing the Attachment
Adapter
If the locking lever on the attachment adapter does not pivot
freely and easily, apply a light coat of grease to the area shown
in Figure 16.
Figure 16
10