4. Assignment of Logical RT in Network DM (NDM)
4.1 ALRTN/ARTKN
Use this command to assign Logical Route Numbers to all external trunks used on a Fusion network.
Assign unique telephone numbers to the whole route for external trunks on the network (including COT,
DAT, Dummy Route, etc.) using this command. The data can be set at the NCN only and should be set for
every external route in every node. Refer to
The "Logical Route Numbers" should be alloted to the whole external trunks, such as the Non-Fusion trunks including COT, TLT, DA T
and LCR as well as DTI's B ch and D ch (used for Fusion). Assign the necessary data by using the ALRTN command.
Internal
Trunk
External
Figure 5-12
shows an example data assignment of this "Logical Route" data.
TLT: RT 15
COT: RT 25
LCN
Node B
FPC=11
LCR: 255
Fusion-Related
Non-Fusion
Figure 5-11 Telephone Number Required
LCN
DAT: RT 23
Node C
DAT: RT 7
DAT: RT 27
DAT: RT 1
LCN
Node D
FPC=13
Figure 5-12 Assignment of Logical Route Number
Assignment of Logical RT in Network DM (NDM)
Figure
5-11.
B ch
DTI
D ch
COT
TLT
DAT
LCR
COT: RT 3
FPC=12
NCN
FPC=1
Node A
COT: RT 2
NDA-24299
DATA PROGRAMMING
Logical Route Number
should be allotted to
all the trunks shaded here.
Data Assignment at NCN
Node A
LGRT: 100 -- FPC = 1, RT = 2 (COT)
LGRT: 101 -- FPC = 1, RT = 27 (DAT)
Node B
LGRT: 200 -- FPC = 11, RT = 25 (COT)
LGRT: 201 -- FPC = 11, RT = 15 (TLT)
LGRT: 202 -- FPC = 11, RT = 7 (DAT)
Node C
LGRT: 300 -- FPC = 12, RT = 3 (COT)
LGRT: 301 -- FPC = 12, RT = 23 (DAT)
Node D
LGRT: 400 -- FPC = 13, RT = 255 (LCR)
LGRT: 401 -- FPC = 13, RT = 1
MAT
(DAT)
CHAPTER 5
Page 69
Revision 1.0