Fccs Link Via Internet/Intranet; External Router - NEC NEAX 2400 IPX Manual

STEP 9: ADPCL
Assign the destination PC (Point Code) on speech channel route (Logical Route) basis.
LGRT=1
STEP 10: ACSCL
Assign the CSC Group Number (CSCG) for designating the Dch and the location of the CCH, in
cooperation with the FPC of the node that is connected to CCIS link.
CSCG
CICG FPC
2-254(n)
0
1
2
2
3
(Basic/
Primary
4
Route)
5
6
7
STEP 11: ACIC1
Assign the data to establish the relation between Point Code of the destination node and CSCG (CSC
Group) of the Basic Route.
Enter the Destination PC assigned by the ADPCL command, and CSCG number of the Basic Route
(even number) assigned by the ACSCL command. It is not necessary to assign the CSC group number
of the Alternate Route here.
PC=3

7.5 FCCS Link via Internet/Intranet

The system can exchange the FCCS data via the Internet/Intranet. As shown below, an FCCS Link can be
established by using the following features:
•

External Router

• Fusion over IP
7.5.1 External Router
This feature allows the system to exchange the FCCS data via the Internet/Ethernet. For this feature, an
FCCS link is connected to an external router.
PC=3
LENS of CCH
MG U G
2 00 0 20
2 00 0 20
2 00 0 20
2 00 0 20
2 00 0 20
2 00 0 20
2 00 0 20
2 00 0 20
CSCG=2
NDA-24299
Assignment of FCH Related Data
CSCG
CICG FPC
2-255(n+1)
0
1
2
3
3
(Alternate
4
Route)
5
6
7
DATA PROGRAMMING
LENS of CCH
MG U G
2 00 0 20
2 00 0 20
2 00 0 20
2 00 0 20
2 00 0 20
2 00 0 20
2 00 0 20
2 00 0 20
CHAPTER 5
Page 103
Revision 1.0