Figure 3-16 Centralized Management Report-Fusion (Example 1) - NEC NEAX 2400 IPX Manual

SYSTEM CONFIGURATION
System Considerations
The following explains service conditions for the network including both FCCS and CCIS links.
When the network comprises FCCS and CCIS links (See
Example: 1
NEC
PRT
PC=10
Node A

Figure 3-16 Centralized Management Report-Fusion (Example 1)

Node A: To send system messages to Node C via Office B, assign Point Code of Node C (12) to ASYD, SYS
1, Indexes 184 and 185.
Node B: To send system messages to Node C, assign Fusion Point Code of Node C (3) to ASYDL, SYS1, Index
532. When this system data is assigned, system messages received from Node A are also transferred
to Node C. However, when data is not assigned (0), system messages received from Node A are
ignored and not transferred to Node C.
System messages received from Node A are not output to the system message printer connected to
Node B.
Node C: Received system messages are stored in the memory area for Centralized Management Report-Fusion.
Node D: To send system messages to Node C, assign Fusion Point Code of Node C (3) to ASYDL, SYS1, Index
532.
CHAPTER 3
Page 24
Revision 1.0
Node B
FCCS
PC=11
FPC=2
CCIS
FPC=4
Node D
NDA-24299
Figure 3-16.)
Node C
PC=12
FPC=3
NEC
Centralized MAT
FCCS
Center Node: Node C
13-H
1. xxxx xxxx 0010 1222
4. x0010 1110 10110 1FFF
7. E23C CAAB12 000 0000
Fusion