Key Setting On Circuit Cards; Pa-M96 (Hub); Figure 4-4 Switch Setting On Hub (Pa-M96) Card; Table 4-1 Sense Switch Setting - NEC NEAX 2400 IPX Manual

INSTALLATION

Key Setting on Circuit Cards

2. Key Setting on Circuit Cards

2.1 PA-M96 (HUB)

After referring to
Note: 1 and 4 to F of the SENSE Switch are not available in this version.
SWITCH NAME
SENSE
CHAPTER 4
Page 34
Revision 1.0
Figure 4-4 and Table 4-1, set the SEL switch on the HUB (PA-M96) card(s).
OPE
MB
ST7
CR7
ST0 CR0
4
SENSE C
C
4
TP7-X
TP6-X
TP5-X
TP4-X
TP3-X
TP2-X
TP1-X
TP0-X

Figure 4-4 Switch Setting on HUB (PA-M96) Card

Table 4-1 SENSE Switch Setting

STANDARD
SETTING
SETTING
0
1
×
2
3
4-F
Set the SENSE Switch arrow to the proper direction,
referring to Table 4-1.
Polarity indication on the STn lamps for TPn-Xports.
Not used.
TPn-X ports operate as a repeater HUB. (Standard setting)
Data-Packet-Collision indication on the STn lamps for TPn-X
ports.
Not used.
NDA-24299
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
DESCRIPTION