Figure 3-17 Centralized Management Report-Fusion (Example 2) - NEC NEAX 2400 IPX Manual

Example: 2 When both FCCS and CCIS links are established between two nodes (See
PC=10
Node A

Figure 3-17 Centralized Management Report-Fusion (Example 2)

Node A/B/C:Refer to
Node D: When Point Code of Node C (12) is assigned to ASYD, SYS 1, Indexes 184 and 185, System
messages are sent to Node C with use of CCIS. When this system data is not assigned (0), and
Fusion Point Code of Node C (3) is assigned to ASYDL, SYS 1, Index 532, system messages are
sent to Node C using FCCS.
Node B
FCCS
PC=11
FPC=2
CCIS
on the previous page.
Example 1
Node C
PC=12
FPC=3
FCCS
CCIS
FPC=4
Center Node: Node C
Node D
NDA-24299
SYSTEM CONFIGURATION
System Considerations
Figure 3-17).
13-H
1. xxxx xxxx 0010 1222
4. x0010 1110 10110 1FFF
7. E23C CAAB12 000 0000
NEC
Centralized MAT
Fusion
CHAPTER 3
Page 25
Revision 1.0