Yamaha DRCX User Manual page 267

11-5 Communication Command Description
11
34
11-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
(1-5) @INIT XPRM <single-axis robot number>
Initializes the X-axis parameter data to match the specified single-axis robot.
For robot numbers, refer to "15-1-2 Robot number list".
Transmission example
Response example
c
CAUTION
After initialization, change the lead length parameter (PRM60) to match the robot lead length.
(1-6) @INIT YPRM <single-axis robot number>
Initializes the Y-axis parameter data to match the specified single-axis robot.
For robot numbers, refer to "15-1-2 Robot number list".
Transmission example
Response example
c
CAUTION
After initialization, change the lead length parameter (PRM100) to match the robot lead length.
(1-7) @INIT CLOCK
Initializes the timer to 0, which is used to measure the total operation time of the DRCX control-
ler. The alarm history and error history are also initialized at this point.
Transmission example
Response example
(1-8) @INIT ALM
Initializes the alarm history.
Transmission example
Response example
(1-9) @INIT ERR
Initializes the error history.
This command is available with controller version 18.50 or later.
Transmission example
Response example
: @INIT XPRM 20 c/r l/f ............... Parameters are initialized to
: OK c/r l/f
: @INIT YPRM 21 c/r l/f ............... Parameters are initialized to
: OK c/r l/f
: @INIT CLOCK c/r l/f
: OK c/r l/f
: @INIT ALM c/r l/f
: OK c/r l/f
: @INIT ERR c/r l/f
: OK c/r l/f
match the F14 robot.
match the F14 robot (vertical
use).