Installing; General Safety Instructions For Installation - Siemens SIPROCESS GA700 Operating Instructions Manual

Installing

6.1

General safety instructions for installation

Lifting and carrying the device
Risk of injury from falling loads
Unsecured or inadequately secured parts can fall during transport or installation and cause
injuries.
• Use suitable tools such as hand pallet trucks or trolleys to transport the device. Secure the
• Use suitable lifting tools or a second person to assist you when lifting and installing the
• When lifting, make sure that you have a secure grip and are standing steady.
• Keep transport routes free of trip hazards, uneven surfaces and slippage risks.
• Wear safety footwear during transport and installation of the device.
Parts in contact with sample gases unsuitable for sample gas
Danger of injury or poisoning, device damage
Hot, poisonous and corrosive sample gases can be released at the connections if the device
parts and accessories coming into contact with sample gas are unsuitable for the sample gas.
• Use only sample gas-contacting connecting parts (pipes, unions and sealing material) that
Note
Material compatibility
Siemens can provide you with support concerning selection of analyzer components wetted by
the process medium. However, the device operator is responsible for the selection of
components. Siemens accepts no liability for faults or failures resulting from incompatible
materials.
Rack-mounted device
Operating Instructions, A5E31874006-12
CAUTION
device against slipping and tipping over during transport.
device. Observe the appropriate safety regulations.
WARNING
are suitable for the connection and for the sample gases. Refer to the information in the
section "Technical specifications (Page 117)".
6
49