Installing/mounting
5.1
Installation location requirements
Insufficient air supply
The device may overheat if there is an insufficient supply of air.
• Install the device so that there is sufficient air supply in the room.
• Observe the maximum permissible ambient temperature. Refer to the information in the
NOTICE
Aggressive atmospheres
Damage to device through penetration of aggressive vapors.
• Ensure that the device is suitable for the application.
NOTICE
Direct sunlight
Damage to device.
The device can overheat or materials become brittle due to UV exposure.
• Protect the device from direct sunlight.
• Make sure that the maximum permissible ambient temperature is not exceeded. Refer to
NOTICE
Strong vibrations
Damage to device.
• In installations with strong vibrations, mount the device in a low vibration environment.
SITRANS Verificator
Operating Instructions, 03/2024, A5E51481698-AA
WARNING
section Technical specifications (Page 45).
the information in Technical specifications (Page 45).
5
17