Mitsubishi Electric AE630-SW Instruction Manual page 11

●(G) Connector for I/O unit (BIF-CON) connection
This connector is used for connection to I/O unit (BIF-CON).
Wiring connection is shown as below.
●(H) IEC rail latch
This is used to attach the BIF-CC to a IEC mounting rail.
IEC rail installation is shown in
Fig 3.7: Wiring Connection
"4.1 IEC rail installation"
.
E-11
BIF-CON cable (200mm)
(*attached to BIF-CON)
Keep distance more than
100mm from the power
distribution circuit.
Hot plugging is not
permitted