Unpacking - Huawei UPS5000-H-400 kVA User Manual

UPS5000-H-(400 kVA-800 kVA)
User Manual (100 kVA Power Module)

6.1.5 Unpacking

Context
● Only trained personnel are allowed to move the UPS. Use a forklift to transport
● To prevent the UPS from falling over, secure it to an electric forklift using ropes
● Move the UPS with caution to avoid bumping or toppling, which may damage
● If the UPS installation environment is in poor condition and the UPS needs to
Procedure
Step 1 Use a pallet truck to transport the UPS cabinet to the specified place, unpack the
cabinet, and remove the screws that secure the UPS to the wooden pallet.
Figure 6-7 Unpacking (400–600 kVA)
Issue 02 (2021-04-22)
NO TE
● The input circuit breakers recommended are for reference only.
● If multiple loads are connected, use recommended specifications for branch circuit
breakers.
● The circuit breaker selection principle is to protect loads and cables, and the cascading
principle is to achieve specific protection.
NO TICE
the UPS case secured to a wooden pallet to the installation position.
before moving it.
the UPS. After placing the case in the installation position, unpack it with
caution to prevent scratches. Keep the UPS steady during unpacking.
be stored for a long time after it is unpacked, take measures to prevent dust. It
is recommended that the UPS be wrapped with the original plastic coat.
Copyright © Huawei Technologies Co., Ltd.
6 Installation
67