Dissassembly Procedures - GE Dash Port 2 Service Manual

Dissassembly Procedures

Separate the Top and Bottom Housings
short screws
long screws
016A
Revision A
Part Lists, Drawings, and Replacement: Disassembly/Assembly of FRUs
015A
044A
Dash Port 2 Docking Station
2000966-138
1. Loosen the six screws from the bottom housing.
127(
The loosened screws are not self-capturing
and will fall out onto your work surface.
2. Hold onto both housings and turn the unit over
a clean work surface.
3. Slide and hold the security lever in the far right
position while separating the top and bottom
housings.
4. Continue to hold onto the security lever and
gently let it slide back into its resting position.
5. Remove the locking lever spring and pin.
6-17