Table of Contents
Advertisement
Checkout Procedures
Recommendations
Verify Correct Docking Station Operation
Verify the Monitor is Secured to the Docking Station
Revision B
Maintenance: Checkout Procedures
127(
Complete the checkout procedures with a Dash monitor connected to
the docking station.
GE recommends that you perform checkout procedures:
upon receipt of the device.
every twelve months thereafter, and
each time the main enclosure is disassembled or a circuit board is
removed, tested, repaired, or replaced.
To troubleshoot operation problems, see Chapter 4, "Troubleshooting".
1. Verify the docking station's security lever starts in the unlock (far
right) position.
2. Position the front of the Dash monitor onto the front channel of the
docking station.
3. Hold onto the monitor and allow the weight of the monitor to descend
firmly onto the docking station. The security lever should move to the
central position.
4. Try to pivot the monitor from front to back to verify it is secure.
Dash Port Docking Station
2000966-037
1
004A
3
008A
2
3-17
Advertisement
Table of Contents
