GE Dash Port 2 Service Manual page 93

Revision A
Part Lists, Drawings, and Replacement: Disassembly/Assembly of FRUs
055A
055A
Dash Port 2 Docking Station
2000966-138
11. Remove the PCB ribbon cable friction connector.
12. Lift off the PCB.
PCB
a. If the PCB is defective, follow your country
requirements for disposal and install the
PCB FRU.
b. If the PCB is not defective, reinstall the
PCB into the connector assembly.
Connector Assembly
a. If the connector assembly is defective,
dispose of it and install the PCB FRU.
a. If the connector assembly is not defective,
reinstall the connector assembly.
13. Insert the PCB ribbon cable friction connector.
6-21