GE Dash Port 2 Service Manual page 94

= step a
b
2
6-22
Part Lists, Drawings, and Replacement: Disassembly/Assembly of FRUs
058A
051A
3
1
025A
049A
Dash Port 2 Docking Station
14. Install the new PCB FRU.
a. Install the five PCB screws.
b. Insert the two power connectors.
15. Position the replacement Connector Assembly
FRU into the bottom housing.
16. Start with the center screw and install the three
connector assembly bracket screws.
17. If the light pipes are to be replaced, route the
light pipes through the bottom housing's LED
opening.
2000966-138
Revision A