Controls And Indicators; Controls; Indicators - GE Dash Port 2 Service Manual

Controls and Indicators

Controls

Security Lever

Indicators

AC Power Indicator
Communication Indicator
2-8
Equipment Overview: Controls and Indicators
When a monitor is placed onto the docking station, the security lever
automatically moves from the full right unlock position to the midpoint
position and firmly attaches the monitor.
Sliding the lever to the full left position inserts and locks the AC power/
communication connector up into the monitor to provide AC power and
network communication.
Sliding the lever to the right will first retract the communication
connector from the monitor. Then, as the lever is slid to the full right
position it will unlock the monitor. Releasing the lever at this point will
allow the lever to return to the midpoint position and prevent
unintentional detachment.
To remove the monitor you must hold the lever in the far right position
while lifting the monitor off the docking station.
A green colored LED is used to indicate that the docking station is
connected to an AC power source.
A green or yellow colored LED is used to indicate the communication
status between the docking station and the monitor.
Green LED
A steady green color indicates the docking station has established
communication with the monitor.
Amber LED
A flashing amber color indicates that the docking station and the
Dash monitor are not compatible. See Chapter 5,
Dash Port 2 Docking Station
2000966-138
"Troubleshooting" .
Revision A