Table of Contents
Advertisement
7.24 Preferences/ Preferences Page .................................................................................. 48
7.25 Restart/Restart Page .................................................................................................. 49
APPENDIX A RJ45 to DB9 pin out ................................................................................. 50
APPENDIX B 9700 and 2033A connection ..................................................................... 51
APPENDIX C SEC connections ....................................................................................... 52
APPENDIX D MIBS ........................................................................................................ 53
1. What is a Netcom?
A Netcom is a standalone UPS peripheral used for UPS monitoring, event
management, SNMP interfacing, and critical event notification. It consists of a small
computer with a serial interface for connecting to and communicating with a UPS, and an
Ethernet interface for connecting to your local network. The Netcom has its own
embedded web server to allow you to monitor the status of the UPS using a Web
browser. Event management is also configured and performed on the Web Server. It
supports the Simple Network Management Protocol (SNMP) for integration with a
Network Management System and Telnet for configuration.
You can configure the Netcom to perform appropriate actions when an event is
detected including email and remote computer shutdown. The optional Remote
shutdown agent runs on one or more remote computers and communicates with the
Netcom to allow remote shutdown of up to 500 computers powered by the UPS.
2. Who do I Contact For Technical Support?
Support group for help configuring and using Netcom or any Mitsubishi UPS product
3. What are the System Requirements for Netcom?
The Netcom runs as a standalone unit. It includes a 120-volt AC power source
plug, and a DE9 to RJ45 communications cable for connecting to the UPS. A standard
network cable for connecting to the local Ethernet network must be provided. The 9900,
2033G and 9800AE UPS have an optional internal power supply that can be purchased,
please contact your local Sales Representative for more details.
3.1 Operating System Requirements
Installation procedure for the shut down codes are located on the CD provided with the
Netcom in a file named "Shut Down Manual". The user will need a copy of their sales
order for the serial number of each shut down code.
SVA026 Netcom 2 User Manual ver5
Contact the Technical
Phone 724-778-5111
Fax 724-778-3146
3
Advertisement
Table of Contents
