Netcom Web Server - Mitsubishi Electric Netcom 2 User Manual

6. Netcom Web Server
Before attempting to connect to the Netcom2 for the first time check the
following;
1. An IP address has been assigned
2. The supplied RJ45 to DB9 cable is connected to the port labeled UPS and
connected to the UPS communication port (contact Mitsubishi or your local service
group)
3. The intranet cable is connected to the Network plug and the amber and green
lights are flashing
4. Power is applied to the Netcom and the power and status lights are on.
5. The proper protocol has been selected; 9700 and 2033A UPS require MIT all
other require SEC.
SVA026 Netcom 2 User Manual ver5 19