Configuring The Ip Address With Windows 7 - Mitsubishi Electric Netcom 2 User Manual

17. Once the "Save" button is selected you will be presented with the following
screen. Selecting OK will write the IP address to the memory of the Netcom. You
will no longer be able to communicate with the Netcom at the default IP address.
**If the Netcom2 is going to be connected to a 2033A or 9700 the protocol will have to
be changed using the DB9 connector supplied with the Netcom2. Please refer to
the step 4.2.1.
4.2.3 Configuring the IP address with Windows 7
1. Connect the cross over cable provided with the Netcom2 to your PC and
the RJ45 port labeled "Network" on the Netcom2.
2. Plug the power supply included with the Netcom2 into a wall outlet and the port
labeled +12VDC.
3. On the PC that the cross over cable is connected to the Netcom, select
in the "Search programs and files" type in "Control Panel".
SVA026 Netcom 2 User Manual ver5
, and
13