Mitsubishi Electric Netcom 2 User Manual page 18

5.2. In the 'File Settings' group select 'APPLICATION UPGRADE' from the
'File Transfer Type' drop down list.
5.3. In the 'Download File Name' edit box select the name of the file,
XX.XX.X.bin, supplied on the Netcom 2 CD.
5.4. In the 'TFTP Settings' group enter the required IP address of the unit to be
upgraded in the 'IP Address' box.
5.5. Click the 'DOWNLOAD TO DEVICE' button. A blue task bar will flow from
left to right and data information will be displayed in the information box. When
"connection closed" appears the firmware installation will be complete.
5.6. The new configuration data will be written to the EEPROM in the Netcom2
unit
5.7. If the Netcom is going to be communicating with a 2033A or 9700 the
protocol will have to be selected. This is done in the HyperTerminal session in
section
SVA026 Netcom 2 User Manual ver5 18