Table of Contents
Advertisement
3.
Remove the steering wheel, dashboard, and
front panel
(Figure
Note:
Carefully lift off the dashboard, ensuring
that the connectors to the existing switches are
not disturbed.
Figure 13
1. Front panel
2. Dashboard
4.
Remove the plug and install the LED light and
the slope-sensor decal to the dashboard
14).
If a hole for the LED light is not present, drill a
19-mm hole in the location shown in
13).
3. Steering wheel
(Figure
Figure
1. LED light
g307374
15..
1. 40 mm
5.
Remove the plug and install the alarm on the
steering-column rear panel
If a hole for the alarm is not present, drill a
30-mm hole in the location shown in
6
Figure 14
2. Slope sensor decal
Figure 15
2. 25 mm
(Figure
16).
Figure
g307287
g308225
17.
Advertisement
Table of Contents
