Sharp AR-FX7 Service Manual page 19

3. Press the [START] key.
Copying is started and the set value is stored.
Normal display NOW PRINTING
Error display DOOR OPEN
JAM
PAPER EMPTY
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Item
1 COPY START Copy start
2 EXP.LEVEL Exposure level selection
3 AE (PHOTO ON) Ultra Fine AE (Half
tone)
4 AE (PHOTO OFF) Ultra Fine AE
5 MANUAL Ultra Fine MANUAL
(PHOTO ON) (Half tone)
6 MANUAL Ultra Fine MANUAL
(PHOTO OFF)
Note: Executable only when the FAX is installed.
5 0
5 0
5 0
5 0
48
48-8
Purpose Adjustment
Function FAX magnification adjustment (read)
(Purpose)
Section FAX
Related soft SW SW112-1 to 8, SW113-1 to 8
Operation/procedure
1. Select "1: COPY START."
The currently set value is highlighted beside the item.
2. Enter the set value of magnification with the 10-key, and press the
[#/P] key.
3. Press the [START] key.
Copying is started and the set value is stored.
Normal display NOW PRINTING
Error display DOOR OPEN
JAM
PAPER EMPTY
There is no operation of tray selection.
The optimum paper tray for the scanned size is selected.
Even when the SPF/RSPF is selected, if there is no original on the
SPF/RSPF, the OC is scanned.
Even when the OC is selected, if there is any original on the SPF/
RSPF, the SPF/RSPF is scanned. (Setting 2)
Item
1 COPY START Copy start
2 SCAN SELECT Scan selection (OC/
(OC/SPF/RSPF) SPF/ RSPF)
3 OC(MAIN) SCAN Main scanning
magnification ratio
adjustment (OC)
Setting
Content Default
range
– –
0 - 99 50
1
Setting
Content Default
range
– –
1-255* 128
1-255* 128
AR-FX7 SIMULATION 6 - 4
Item
4 OC(SUB) SCAN Sub scanning
magnification ratio
adjustment (OC)
5 SPF(MAIN) SCAN Main scanning
magnification ratio
adjustment (SPF)
6 SPF(SUB) SCAN Sub scanning
magnification ratio
adjustment (SPF)
7 RSPF(MAIN) SCAN Main scanning
magnification ratio
adjustment (RSPF)
8 RSPF(SUB) SCAN Sub scanning
magnification ratio
adjustment (RSPF)
* The adjustment can be made in the range of -12.7% - +12.7% by the
increment of 0.1%.
Note: Executable only when the FAX is installed.
48-9
Purpose Adjustment
Function (Purpose) FAX magnification adjustment (print)
Section FAX
Operation/procedure
1. Select "1: COPY START."
The currently set value is displayed beside the item.
2. Press the [START] key.
Copying is started and the set value is stored.
Normal display NOW PRINTING
Error display DOOR OPEN
JAM
PAPER EMPTY
There is no operation of tray selection.
The optimum paper tray for the scanned size is selected.
When two pages are scanned, duplex printing is made.
Item
1 COPY START Copy start
2 Horizontal Print magnification ratio
adjustment (Horizontal, vertical
to paper passing)
3 Vertical Print magnification ratio
adjustment (Vertical, parallel to
paper passing)
4 Horizontal Print magnification ratio
(DUPLEX) adjustment on the back surface
(Horizontal, vertical to paper
passing)
5 Vertical Print magnification ratio
(DUPLEX) adjustment on the back surface
(Vertical, parallel to paper
passing)
Note: Executable only when the FAX is installed.
Setting
Content Default
range
1-255*
1-255*
1-255*
1-255*
1-255*
2
1
1 2 8
1 2 8
1 2 8
1 2 8
1 2 8
1 2 8
Setting
Content Default
range
1-255
1-255
1-255
1-255
1-255
128
128
128
128
128
128
128
128
128
128