Prerequisites
Replacing damaged or missing screws
•
Damaged or missing screws must only be replaced by steel screws as specified in the
installation drawings that conform to DIN 267 and have the specified tensile strength.
CAUTION
Cleaning
•
The unit must always be switched off or disconnected before cleaning.
•
Use only water or a luke warm mixture of a household cleaner diluted with water to clean
the unit.
•
Do not use an abrasive or organic solvents or cleaning agents containing solvents such
as gasoline used for cleaning purposes, alcohol or stain remover. Do not spray water on
the unit.
•
For further information, refer to the Operating Instructions "Cleaning/Disinfecting".
Siemens AG
Medical Solutions
All Allen screws must have a tensile strength rating of 8.8.
RXB8-115.061.02
Rev. 01
Page 3 of 4
10.95
CS PS 24
1 - 3
1
1
POLYMOBIL III