Visual Inspection; Check The System For Damage; Labels; Customer Documentation - Siemens Polymobil 10 Maintenance Manual

Inspection and maintenance
2 Inspection and maintenance
2.1

Visual inspection

2.1.1

Check the system for damage

•
If necessary, repair or replace damaged parts.
SIM Cover Panels
SIM Switchbox/control console
SIM Release cable
SIM Power and primary cable
•
Check the cables for damage or brittleness.
Pay special attention to the cables at the pivot points of the flexible hose!
- Ensure that the holder is secure at points where the cables are subject to particular
stress due to movement.
2.1.2

Labels

SIM Labels
•
Check all labels on the system with the model and serial numbers as well as warnings.
The placement of these labels is described in the operating instructions
(chapter "Positioning the Information Signs").
•
Verify that all labels are present and legible.
2.1.3

Customer documentation

SI Customer documentation
•
The operator manual must be available at the customer site.
•
The operator manual is to be checked for availability, completeness, and legibility.
2.2

Check screws

•
Make sure that they are secure and tighten them if necessary:
SIM Cassette holder
SIM Pedals
SIM Front wheels
2.3

Check handles

•
Make sure that the handles are secure and tighten them if necessary:
SIM Single tank holder
SIM Single tank
SIM Control handle over the control console
Siemens AG
Medical Solutions
RXR8-120.101.01
Rev. 05 07.05
Page 1 of 14
CS PS 24
2 - 1
Polymobil 10