Requirements
Replacing damaged or missing screws
•
As specified in the installation drawings, damaged or missing screws may only be
replaced by steel screws conforming to DIN 267 and having the specified tensile
strength.
CAUTION
Cleaning
•
The unit must always be switched off or disconnected before cleaning. Use only water to
clean the unit or a lukewarm solution consisting of water and a household cleaning
agent.
•
Do not use abrasive cleaning agents or organic solvents such as benzine, alcohol or spot
remover.
•
Do not spray water on the unit.
•
For additional information, refer to the Operating Instructions "Cleaning/Disinfecting".
Siemens AG
Medical Engineering
All Allen screws must have a tensile strength rating of 8.8.
SPR8-125.034.01
Rev. 03
Page 5 of 6
01.00
TD SD 24
1 - 5
1
1
POLYMOBIL Plus