SERVICE & INSTALLATION MENU
6.2.10 Simple Maintenance
This menu is available if the optional setting "JA" is set to
01 from the function selection menu. From this menu, some
parameters like operating times and some items of the check
mode can be displayed from the "Service Menu".
1 Select "Simple Maintenance" on the "Service Menu" screen
and press "OK".
2 Press " ", " ", " ", or " " to select the indoor unit. Press "OK".
If there is only one indoor unit connected to the wired remote
controller, this screen is not displayed (the screen of Step3 is
shown).
3 Press " " or " " to change the page of Simple Maintenance
data.
80
PMML0565 rev.1 - 04/2022
List of Simple Maintenance Function
No.
Item
1
Compressor Time
2
Fan operation time
3
V-belt Time
4
Inlet Air Temperature
5
Outlet Air Temperature
Indoor Unit Liquid
6
Piping Temperature
Indoor Unit Gas Piping
7
Temperature
8
Outdoor Temperature
Outdoor Unit Pipe
9
Temperature
Compressor
10
Temperature
11
Discharge
12
Inlet Pressure
13
Compressor Current
Note
Some units do not support this
function.
Corresponds to item "b2" in Check 1.
Corresponds to item "b3" in Check 1.
Corresponds to item "b4" in Check 1.
Corresponds to item "b7" in Check 1.
Corresponds to item "b6" in Check 1.
Corresponds to item "b8" in Check 1.
Corresponds to item "bA" in Check 1.
Corresponds to item "H1" in Check 1.
Corresponds to item "H2" inCheck 1.
Corresponds to item "P1" in Check 1.