Reset The Setting; Power Savings Setting - Hitachi PC-ARFG-E Installation & Operation Manual

FUNCTION MENU

5.2.4 Reset the setting

1 Select "Operation Schedule" on the "Function Menu" screen
and press "OK".
• If the current time is not set, the "Adjusting Date/Time"
setting screen is displayed.
• This menu to reset the schedules is available only if some
settings have been done.
2 Press " " or " " to select "Reset All" and then press "OK".

5.3 POWER SAVINGS SETTING

No. Item
Limits the heating and cooling capacity
of the outdoor unit in order to reduce the
running current of the system to match with
Capacity Control

the capacity control setting.
Set control mode and power savings level
with its corresponding value.
Interlock with indoor units of the same
outdoor unit system and switch to FAN
Rotation Control

operation in sequence.
Set control mode and fan mode time.
Cooling/heating mode and fan mode are
Intermittent
repeated at regular intervals.

Control
Set power savings level.
No Setting Power savings operation is not performed.

13 PMML0565 rev.1 - 04/2022
Description
3 Select "Yes" by pressing " " or " "and then press "OK".
All schedule and holiday settings are reset and the screen
returns to the Step 3 of "5.2.1 Schedule Day and Time
Setting".
?
N O T E
• For detailed capacity control settings information refer to
Saving Details Setting" in this manual.
• The power savings mode that can be switched differs depending on
the type of the outdoor unit or indoor unit.
• The power savings modes that can be switched according to the
"Main / Sub" display are as follows.
- Main — the power savings mode can be switched from
- Sub — the power savings mode cannot be switched. The power
savings mode of the sub synchronizes with that of the main
remote controller of the same outdoor unit system.
• When the power savings mode is "Indoor rotation control", the power
savings level cannot be changed.
• When the power savings mode is "No Setting", the power savings ON
/ OFF and power savings level cannot be changed.
• When the power savings mode is "Outdoor capacity control" and
sub, the power savings ON / OFF and power savings level cannot
be changed.
• When the power savings mode is switched, power savings ON / OFF
is set to OFF.
• When using the power savings function, the cooling and heating
capacity may decrease.
• Detailed settings can be changed from the power saving details
setting.
"6.2.4 Power
 to  .