Optional Accessories - Mitsubishi Electric AG-150A-A Installation Manual

13 Optional Accessories

Parts
Power supply unit
Expansion controller
Electric box
Mounting attachment A type PAC-YG85KTB
Mounting attachment B type PAC-YG81TB
External input/output
adapter
Black surface cover
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide resonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Model
Supplies power to the controller and M-NET
PAC-SC51KUA
transmission line.
Enables the connection of up to 150 indoor and
PAC-YG50ECA
LOSSNAY units to an AG-150A.
PAC-YG83UTB Use for wall-embed installations
Use when both the controller and a power supply
unit (PAC-SC51KUA) for a transmission line are
mounted on a wall.
Use for wall-mount installations
Enables the use of the external input/output
PAC-YG10HA
function
PAC-YG71CBL Surface cover
Usage
- 29 -
Note
Each Expansion controller
can control up to 50 units.
(Up to three Expansion
controllers can be connected
to a system.)
Required when using the
external input/output function