Table of Contents
Advertisement
No.
Name
24
Optical Connector Cleaner
25
Optical Transceiver Removal
Tool
26
Multi tester
27
Fiber Optical Test Set
28
Angle Meter
29
Multi master (VSWR & RF
Power)
30
Compass
The required installation tools may vary depending on the conditions at the site.
In addition to the basic tools, a protractor, ladder, safety equipment, cleaning tools,
and so on should also be prepared in consideration of the site conditions.
RFV01U-D1A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Specification
For LC Connector
Normal
Digital Pocket Tester
Wave length: 1310 nm, 1550
nm (single mode) 850 nm,
1310 nm (multi mode)
Normal
Normal
Normal
Confidential
Chapter 1 Before Installation
Purpose of use
For Optical Connector Cleaning
Separate the Optical Module
The voltage and current
measurements
Whether measured cable
disconnection
Optical level check
Antenna angle measurement
Feeder VSWR measurement
Check azimuth during installation
9
Advertisement
Table of Contents
