Table of Contents
Advertisement
When fixing the mounting bracket, the specification of pole is from 50 A (2.38
in./60.5 mm) to 100 A (4.5 in./114.3 mm) and the specification of carriage bolt is
M10 × 220L.
When fixing pole, fix it using the outside hole of mounting bracket_front.
2
Figure 23.
Assembling Mounting Bracket (1)
3
RFV01U-D1A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Outside holes
Insert carriage bolts to the outside hole of mounting bracket_front.
Mounting Bracket_Front
M10 Carriage Bolt
Pass the carriage bolt through the side closed hole of the mounting
bracket_rear, fix the fastening material, and fasten the other carriage bolt to the
mounting bracket_front only.
Confidential
Chapter 2 Installing System
Inside holes
25
Advertisement
Table of Contents
