Fixing Unit Bracket; Parts And Tools For Fixing Unit Bracket_Standard Installation - Samsung RFV01U-D1A Installation Manual

Fixing Unit Bracket

There are two ways to fix a unit bracket to the RRH. One is fixing a unit mounting
bracket to the rear side of RRH (Standard installation). The other is fixing a unit
bracket to the side of RRH (Side installation). These are the same for the wall type
and pole type installation procedures.
[Unit Bracket Standard Installation]
1
Table 4.

Parts and Tools for fixing Unit Bracket_Standard installation

Category
Parts
Recommended Torque Value
Working Tools
2
RFV01U-D1A Installation Manual v2.0
Copyright © 2017, All Rights Reserved.
Unit Bracket
(RRH rear)
To fix Unit Bracket_Standard Installation
Make sure that you have the following items:
Description
Unit bracket
Fasteners M6 × 35L Hex. Bolt
(washer assembly)
M3 Screw
M6 Hex. Bolt
Torque Wrench (10~50 lbfin), Torque Wrench Spanner head (apply Hex.
Head: 10 mm), Spanner (10 mm), Torque Driver (2~10 lbfin), Screw Driver
Bit ('+', No. 2), Screw Driver ('+', No. 2)
Loosen a fastener of finger guard_rear and separate the dummy cover from it.
Chapter 2 Installing System
Unit Bracket
(RRH left)
[Unit Bracket Side Installation]
1 EA/RRH
6 EA/RRH
5.6 lbf·in (6.4 kgf·cm)
43 lbfin (50 kgf·cm)
Confidential
21