Connecting The Ct(U)-R( ) Unit To The Pc; Installing The Optional Headset; Installing The Driver On The Pc; Hf-R( ) Unit (Handsfree Unit) - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
I
S 4
NSTALLING
ECTION
4.1
System Hardware Manual
3.5.2

Connecting the CT(U)-R( ) Unit to the PC

Connect USB cable from the PC to the CT(U)-R( ) Unit as shown in
Figure 12-27 Connecting the USB Cable to the CT(U)-R( )

Figure 12-27 Connecting the USB Cable to the CT(U)-R( ) Unit

3.5.3

Installing the Optional Headset

Install the headset and anchor it in the cord slot on the multiline
terminal as shown in
Multiline Terminal on page
3.5.4

Installing the Driver on the PC

Using the download from Web with the CT(U)-R( ) Unit install the
driver on your PC. Refer to the CT(U)-R( ) Unit installation
instructions for installing the driver.
U
NITS AND OTHER

HF-R( ) Unit (Handsfree Unit)

The Handsfree Unit provides full-duplex handsfree communication for a
desktop user. Large or enclosed areas may cause poor full-duplex operation.
This unit comes with the handsfree adapter and an external microphone unit.
This adapter can be installed on any DTR/DTH multiline terminal except
DTR-2DT-1( ).
Figure 12-23 Attaching the Headset to the
12-17.
D
EVICES
Issue No. 1.5
Unit.
12 - 21