Figure 8-7 Pc Assignment In Ex-Fccs Network - NEC NEAX 2400 IMX Manual

2. Unique PCs (Point Codes) in the CCIS network connected with EX-FCCS are required.
All PCs used in the network must be different.
(For the system to be connected with the next system via CCIS link or the large sized network, this assignment is
required.)
PC13
2
IVS
FUG1
FPC1
PC1
FPC3
PC3

Figure 8-7 PC Assignment in EX-FCCS Network

3. The CCH to be used is selected as follows.
1) when the call is processed using the speech line (Bch), the outgoing/incoming route, Logical Route
(LRT), decides CCH.
LRT → PC → CSCG → CCH
2) when the call is processed without speech line (Bch) - inter-office service such as CALL BACK,
MESSAGE WAITING service, MCI, etc., the called party's number or PC of the destination decides
CCH.
(a) the called party's number → LRT → PC → CSCG → CCH
(b) PC → CSCG → CCH
3) when logging into NEAX2000 IVS
be logged in decides CCH.
(a) NEAX2000 IVS
PC → CSCG → CCH
(b) Remote FUG
FUG+FPC → PC → CSCG → CCH
*FUG and FPC to be designated for log-in are converted automatically within the system.
FUG2
FPC2 FPC1
PC2
PC5
FPC4 FPC3
PC4 PC7
FUG3
FPC1 FPC2
PC9 PC10
FPC3 FPC4
PC11 PC12
2
or remote FUG from the Centralized-MAT, PC of the node to
2
ND-70185 (E)
Get other manuals https://www.bkmanuals.com
PC14
2
IVS
FPC2
PC6
FPC4
PC8
LEGEND
: FCCS : EX-FCCS
: Enhanced CCIS : Fusion Group (FUG)
EX- FCCS
EX-FCCS Features
CHAPTER 8
Page 181
Revision 3.0