UNIVERGE SV8100/SV8300
System Hardware Manual
1.
Ensure the chassis is powered down.
Do not remove or install this blade
with the power on.
2.
Locate the door positioned on the left end (expansion
bay) of the Controlling Chassis (refer to
PZ-BS10 Expansion Bay in Controlling
Figure 5-40 PZ-BS10 Expansion Bay in Controlling
3.
From the left side of the chassis, pull cover outward
to expose the expansion bay.
Figure 5-41 Open Base Chassis Cover
4.
Pull the cover toward you to remove.
Cover must be removed prior to installation of PZ-BS10
blade.
Issue No. 1.5
Figure 5-40
Chassis).
Expansion
Chassis
5 - 37