UNIVERGE SV8100/SV8300
System Hardware Manual
9.
3.5.4.4 Connect the Controlling and Expansion Chassis
Installment of the PZ-BS10 blade and PZ-BS11 blade(s) must be
completed prior to installation of the provided (Cat 5) expansion
cabling.
Expansion Chassis Interface Unit
for the Expansion Chassis
PZ-BS11
Expansion Chassis Interface Unit
for the Controlling Chassis
PZ-BS10
Figure 4-41 19" Expansion Chassis Interface Units
1.
Close the PZ-BS11 blade cover.
Figure 4-40 PZ-BS11 Installed (Cover Closed)
Ensure Controlling and Expansion chassis are
powered down.
Issue No. 1.5
4 - 33