Ap(A)-R( ) Unit/Ap(R)-R( ) Unit (Port Adapter); Switch Settings; Figure 12-15 Connecting A Multiline Terminal To An Analog Telephone Using An Ap(A)-R( ) Unit/Ap(R)-R( ) Unit (Example); Figure 12-16 Ap(A)-R( ) Unit/Ap(R)-R( ) Unit Switches - NEC UNIVERGE SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
3.3
Figure 12-15 Connecting a Multiline Terminal to an Analog Telephone using an AP(A)-R( )
System Hardware Manual

AP(A)-R( ) Unit/AP(R)-R( ) Unit (Port Adapter)

The AP(A)-R( ) Unit Analog Port Adapter without Ringer or the AP(R)-R( ) Unit
Analog Port Adapter with Ringer is used to install a single line telephone,
modem, credit card reader, wireless headset, or other compatible analog
device.
The AP(R)-R( ) Unit generates ringing signals and requires an AC-2R/AC-3R
Unit.
The AP(A)-R( ) Unit or the AP(R)-R( ) Unit can be installed on all multiline
terminals except the DTR-2DT-1( ).
Figure 12-15 Connecting a Multiline Terminal to an Analog Telephone using an
AP(A)-R( ) Unit/AP(R)-R( ) Unit (Example)
AP(R)-R( ) Unit is connected to the ESI(8)-U( ) ETU and to an analog
telephone.
Multiline Terminal + AP(A)-R( ) Unit or AP(R)-R( ) Unit
ESI
ETU
Line Cord (2-
3.3.1

Switch Settings

The AP(A)-R( ) Unit and AP(R)-R( ) Unit have three switch locations.
Refer to

Table 12-3 AP(A)-R( )/AP(R)-R( ) Unit Switch Settings

description of each switch and an explanation of the settings.
(use only with AP(R)-R( )
Unit/AP(R)-R( ) Unit (Example)

Figure 12-16 AP(A)-R( ) Unit/AP(R)-R( ) Unit Switches

illustrates how the AP(A)-R( ) Unit/
Line Cord (2-
Core
AC Adapter
Unit)
Issue No. 1.5
Analog
Telephone
for a
12 - 11