Issue No. 1.5
4 - 20
3.3.2
Multiple CHS2U-AU Chassis Installation
Expansion chassis (maximum of three) can be added to the CHS2U
STAND KIT and will require an additional CHS2U JOINT BRACKET
KIT per chassis.
1.
Install the five rubber feet to the bottom of each chassis.
Figure 4-19 Attach Rubber Feet to CHS2U-AU Chassis
2.
Each additional chassis will require CHS2U JOINT BRACKET
KIT to be installed (refer to
Brackets from CHS2U JOINT BRACKET
Expansion
Plates
Figure 4-20 Install Additional Brackets from CHS2U JOINT BRACKET KIT
UNIVERGE SV8100/SV8300
Figure 4-20 Install Additional
KIT).
Installing the SV8100 Chassis